GUOMAT 型号.:1B5022
GUOMAT 型号.:1B5022
PHOENIX SP 1 B 07 Industrial Air Suspension Bags 1B5022 Bellow No.1B120-9
Detailed Product Description
| Material: | Rubber And Stainless Steel |
PHOENIX |
SP 1 B 07 |
| Warranty: | 12 Months | GUOMAT |
1B5022 |
| Other Name: | Air Suspension Spring |
Bellow No. |
1B120-9 |
| 1B5022 Technical Parameters | |
| Top Cover Plate Diameter | 135mm |
| Bottom Cover Plate Diameter | 135mm |
| Screw Center Distance | 53mm |
| Distance Gas Hole Between Nuts | 26mm |
| Gas Hole | G1/4 |
| Screw (Nut) Tooth | 2pcsXM8X1.2 |
| Rubber Bellows MAX Diameter | Max. Φ215 |
| The Stroke | 50-115mm |
PRODUCT DEscriptION
The effect of the air spring is improving the vehicle smoothness by vibration isolation.For example, when driving, it can provide an available operating stroke, in this operatingstroke, the vibration of the wheel will not pass to the suspension or the cab. So whenthe wheels on the road, winnowing, the air spring would reduce tremors of the vehiclebody and seat to improve the vehicle ride comfort.
The structure of the industrial air spring element:
❶ screw bolt / Stud - Produced as a permanent part of the Cover Plate assembly for maximum strength and durability. It is used to attach the air spring to the vehicle’s suspension system.
❷ Combined link rod / Combo Stud – Used as the dual purpose of installing the air spring to the suspension system and providing the air inflation.
❸Nut / Blind Nut – As well a permanent part of the Cover Plate assembly. Provides an alternative to bolt installation system. It is inside defect within the iron plate
❹ Gas Hole / Air inlet / Air Fitting – Most usually 1/4 N.P.T. which provides the air entrance to the rubber bellows.
❺ Cover Plate - Curled up to more durable bellows design and the largest quality control in the factory. Allows 100% of the leak test before shipment.
❻Rubber Bellows - Air Bellows includes four layers of materials: an inner layer, two layer cord - reinforced fabrics, and a cover. Construction of a natural rubber provides – 65F functional properties.
❼ Bumper block / Buffer block - Solid rubber or engineering plastic device designed to prevent major damage to the vehicle or suspension in the event of a sudden loss of air pressure in the spring.
❽ Bottom Piston - Provides a low installation of air spring. To control the pressure in a changing under the load characteristics of spring.
❾ Piston Bolt - Connecting the piston to the bellows. Sometimes extensions as an additional vehicle suspension spring.
❿ Girdle Hoop / Girdle Ring - Molded wire-wound ring to provide lateral stability of the complex type spring bellows.
Composite Piston - GUOMAT provides a composite of glass fiber reinforced plastic piston into the reversible sleeve spring bus suspensions.
